| Sluice Master | Information | Specifications | | Machine: Single phase | 0.75Kw motor | 240 volts - 1 phase - 50Hz
3 wire
5.4 amp F.L.C 13 amp fuse | Machine: Three phase
| 0.75Kw motor
| 400 volts - 3 phase - 50Hz
5 wire
2.1 amp F.L.C 6 amp fuse | Single & three phase isolator
| Isolator to I.E.C. standards
| 20 amp isolator | Maximum loading:
Pulp products only | 4 max
| Disposable bedpans
Urine bottles
Any combination of disposable or unrine bottles
| | Pipework connections | Mains inlet
| 3/4” B.S.P. female connection, on hose attached to the machine
To be connected to a 3/4” male stub and isololating valve.
Ridgid pipework only. (Supplied by customer) | | Drain outlet | 50 mm (2”) multifit P trap | Mains water inlet flow rate
| Required flow rate
| Min: 8 Litres
| Cistern
| Inlet protected by a type “A” Air gap to BS 6281:Pt1:1992
| 16.5 Litres capacity | Cistern Overflow
| Never connect the overflow to the drain. | Ensure any discharge is visible | Direction of rotation for the macerator motor
| Single phase machines are supplied with the correct rotation. Three phase machines, must be checked. | Clockwise direction only when looking into the hopper. | Weight of Machine
| Machine only
| 83kg
| | Machine on pallet | 88kg | Mounting
| Floor
| 9mm base clearance holes for 8mm securing bolts
| All installations must comply with statutory regulations, local water laws and relevant codes of practice of the country of installation. Responsibility for this must rest with the installer. The company make every effort to comply with national requirements/standards.
| | | | | |
|
|
|
